Machines with offset drives are often thought of as insensitive to angular errors between driving and driven shaft.
Vibration analyses and experiences from paper industry professionals have proved that this is not the case.
The Offset fixture comes with a number of methods
of attachment. The system is designed so you can,
in most cases, utilize the coupling bolts themselves
when mounting the arm on the flange.
The Offset laser fixture is adjustable in a
plane parallel to the flange face of the stationary
machine and can be set at any position to eliminate
the offset from the driven unit.
The built-in lasers in each turret are pre-adjusted
so the laser beam represents the axis of rotation
for the unit, it is mounted on.
The Clock method is used to get the result.
In the Clock method, machinery positions are
calculated by taking three points with 180
degrees of rotation.
The Fixturlaser Offset Kit
Complete set of fixtures and
software for alignment of offset
mounted machines/cardan coupled
Accessories for the Fixturlaser Offset Kit
Fixturlaser Offset Accessory
Additional arm with 2 distance pieces
and 2 washers with grooves
| Weight, standard system incl. case
| Weight, standard system incl. optional
equipment and case
| 11,9 kg
| Dimensions of case (L x H x W)
|| 780 x 325 x 135 mm
| Max distance between bolt holes
|| 360 mm
| Max offset
|| 650 mm
|| Anodized aluminum
| Laser pointer
|| Class 2 laser
| Operating temperature (laser pointer)
|| 0°C - +50°C
| Storage temperature (laser pointer)
|| -20°C - +70°C
* Specifications are subject to change without notice.