The Fixturlaser GO Basic Delivers Live Values and Icon Based Guidance


Our entry product, the Fixturlaser GO Basic, comes with high tech hardware and software, and many functions to increase the user friendliness. As with all the other Express Alignment products, the Fixturlaser GO Basic also uses the innovative and remarkable Express Alignment measurement units that will save you a lot of time and headache.

 Shaft alignment with Fixturlaser GO Basic

Measurement Technique and Accuracy

All Fixturlaser shaft alignment tools use two measurement units, i.e. two laser beams. With the integrated innovative technology, 30 mm CCD sensors and line laser, we have virtually eliminated rough alignment.
This is a benefit you would not enjoy with the measurement technique that uses only one laser beam. With such a technique, you would have to remeasure after each and every adjustment.

The measurement units also deliver extremely high measurement accuracy. Measurement readings are taken in three positions with a minimum of 45° shaft rotation between them. You can sample up to 40 measurements points in each position giving a total of 120 points for calculation of a possible machine misalignment.
Also, the CCD sensors allow for digital signal quality control, further enhancing the measurement accuracy.

Intuitive User Interface

Our intuitive user interface that is based on icons and symbols, thus eliminating any language barriers, will guide you throughout the measurement and adjustment process. 
The rotation guide indicates with black or white fields if you are within the permitted measurement area or not.
The measurement result is shown as coupling values and foot values for horizontal and vertical direction. The result field is enhanced with symbols indicating angular and/or offset errors.
During the measurement process, an angle guide will help you reach the correct measurement position. Arrows by the machine’s feet will show you in which direction the machine needs to be moved.

Saving and Documentation

Saving is handled by using the Memory Manager function; the Fixturlaser GO Basic has the capacity to store 350 measurements.
Documentation of measurement reports is really easy. By connecting the display unit to the PC’s USB connection, the files are rapidly transferred using the Explorer function in the PC.

What's in the case?

Fixturlaser GO Basic
1 display unit
1 sensor unit receiver M2
1 sensor unit transmitter S2
2 shaft brackets complete incl. 4 rods, 150 mm and chain, 470 mm
1 USB cable A-B 1 m
2 pcs of cable 3 m
1 tape measure 5 m
2 pieces of angled universal tool
3 pieces of battery LR14 C-cell Alkaline
1 Fixturlaser GO Basic manual
1 Fixturlaser GO Basic CD-ROM manual - multi-languages

Technical specification


Weight (incl. all standard parts) 5,0  kg (11,0 lbs) 
Storage Temperature -20 to 70°C (-4 to 158°F)
 Material  High Impact ABS Plastic
 Environmental protection:  Dust, water (5m/16 feet), and air tight with air pressure compensation valve
 Drop Test:  3 m (10 feet) on to concrete floor

415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

 Display Unit  
 Housing Material  High impact ABS plastic and TPE rubber
 Operating Temp:  -10 to 60°C ( 14 to 140°F)
 Storage Temp:   -20 to 70°C (-4 to 158°F)
 Relative Humidity: 10 – 90%
 Weight  0,66 kg (1,46 lbs) with batteries
 Dimensions  205 mm x 116 mm x 56 mm (8.1 in x 4.6 in x 2.2 in)
 Environmental Protection:   IP 54
 Flash storage memory  500 Mb
 Display size  4” (102 mm) diagonal (84 x 56 mm)
 Interface  Membrane Switch Keyboard
 Peripherals  2 RS-485, 1 USB slave port
 Power supply:  3 x 1,5V LR-14 (C) Alkaline batteries or 1,2V NiMH HR-14 Rechargeable Nickel Metal Hybride cells
 Operating Time:   12 hours typical use
 LED Indicators  Green/Red
Sensor Units  
Housing Material Anodized aluminum and high impact ABS plastic molded over with TPE rubber
Operating Temp -10 to 60°C   (14 to 140°F)
Relative Humidity 10 – 90%
Weight 170 g (6,0 oz)

79 mm x 77 mm x 34 mm (3,4 in x 3,0 in x 1,3 in)

Environmental Protection:  IP 65 (Dust tight and protected against water jets)
Laser 650 nm class II diode laser
Laser Line Fan Angle
Laser line width (1/e2):  1,6 mm
Laser line divergence (full angle): 0.25 mrad
Laser Power: < 1 mW
Measurement distance: Up to 5 m
Detector CCD
Detector length:  30 mm (1.2 in)
Detector angular sub tense 30 mrad/m (3 mm/100 mm per meter)
Detector resolution:  1 µm
Measurement accuracy  0.3% ± 7 µm
LED Indicators:  Laser transmission and status indicators
Inclinometer resolution 0.1°
Inclinometer accuracy:  ±0.5°
Ambient light protection: Optical filtering and ambient light signal rejection
Laser safety   
Shaft brackets  
Fixture V-fixture with non-twisting chain, width 20 mm (0,79 in)
Material Anodized aluminum
Shaft diameter Ø 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)
Rods 4 pcs 150 mm (5.9 in)


 Fixturlaser rod kit  
Rod kit 4 pcs 100 mm (39.4 inch) Extension chain, 1020 mm (118.2 inch) One thin chain fixture
  Fixturlaser Extension fixture Rod Stabilizer
Magnetic brackets 2 pcs 60 - 80 mm (23.6-31.5 inch) Extension fixture, 49 mm and 94 mm Rod stabilizer

 Extension cable, 3 m